Polymer Materials

TERMA tape is a heat-shrinkage double-layer tape made of a layer of radiation ally cross-linked polyolefin and a layer of hot melt adhesive, which provides high adhesion of tape with pipe material. We sell the following types of tape depending on their purpose

	» Catalogue [.pdf]
	» Images

TERMA for external insulation of steel pipes up to 1420mm in diameter to be used in tress and factory environment;

TERMA-CTMP Cup to achieve triple-layer cover when insulating welded joints in tress conditions. The Cup set includes:
1. TERMA-CTMP Cup.
2. TERMA-LKA Tape
3. Two-part epoxy primer.

TERMA-CT Tape to achieve double-layer cover when insulating welded joints in tress conditions (used together with TERMA - LKA Tape).

TERMA-P to repair points of fault in factory-made polyethylene cover and/or for external pipe cover based on heat-shrinkage tapes;

TERMA-P3 for filling defective areas when repairing points of fault in factory-made polyethylene cover;

TERMA-LKA for enclosing heat-shrinkage cups when insulating pipe welded joints.

TERMA-L heat-shrinkage tape without adhesive layer. It is used as a cover for gas pipeline bitumen coating;

TERMA-M (MX) - heat-shrinkage tape with bituminous-polymeric adhesive layer (layer of radiation ally cross-linked heat & light stabilized polyolefin basic tape + under layer of bituminous-polymeric adhesive). It is used for “cold” application with spiral winding method. It is also possible to use as cups for “cold” application together with TERMA-LKA.